LG KC910 Renoir disassembly guide

If you are looking for the LG KC910 Renoir disassembly guide, you have certainly come to the right site here. Tools required: Phillips size 0 screwdriver, plastic tool such as a guitar plectrum or credit card.   LG-Renoir info

1. Remove your back cover, battery, sim and memory card. Remove the six screws you can see.

kc9101

 

2. Slide something like a credit card in-between the housing and battery compartment, as shown below. This will release the back part of the phone.

kc9102

 

3. With the back of the housing removed, your phone should look like below. The circled connector needs to be disconnected. It attaches like a plug and socket. Just lever it away from the phone to unplug.

kc9103

 

4. Lift the green circuit board from the phone. It should come away with little force. Note that when you do this, a connector on the back of the circuit board will unplug from the phone (the large circled connector in the photo below). The connector circled connector at the top of the phone needs to be disconnected. Again, it attaches like a plug and socket. Just lever it away from the circuit board to unplug. LG-Renoir info

kc9104

 

5. Lift the grey part from the phone. It should come away with little force. Note that when you do this, a connector on the back of the green circuit board will unplug from the phone (the small circled connector in the photo below). The larger circled connector also needs to be disconnected. Again, it attaches like a plug and socket. Just lever it away from the circuit board to unplug.

kc9105

 

6. The connector circled far right below again attaches like a plug and socket and needs to be disconnected. The other two parts circled, the speaker and the ringer, are lightly stuck down with a tacky glue or tape and need to be levered away from the phone. Peel back the little sticky gold foil as well.

kc9106

 

7. Your phone should now look like below.

kc9107

 

8. Now slide your plastic tool all the way around the join of the front cover to release it.

kc9108

 

9. Your phone should now look like below.

kc9109

 

10. Slide your plastic tool under the LCD screen. It will be stuck down lightly.

kc91010

 

11. You should now have the LCD screen removed. Reverse the whole procedure for reassembly.

kc91011

 

Source: http://www.formymobile.co.uk/kc910disassembly.php

LG Cell Phone – Related Posts

3 thoughts on “LG KC910 Renoir disassembly guide”

  1. Hi i was just wondering i broke my screen on my kc910 renoiur and wanted to know if the screen from the KU990 would work on my kc910? thanks

  2. hi my fall and i took it to repair and they stole my mouth peace from the board and the volume botten is also not functioning as well as the ringer pls can i get a new board in picture 6 and 7 from ur company because can’t get some in my country ghana (lg kc 910) hear from u soon thank u

Leave a Reply

Your email address will not be published.