How to Root LG Optimus 2X with Andoird 4.0 ICS (V30A & V30B)

This guide will show you how to root LG Optimus 2X with Andoird 4.0 ICS (V30A & V30B) in an easy way. The process is simple without any risk. All credits to MR.DING who makes the tutorial. Thanks again.

Importance: This tutorial only works for Vista,Win7,Win8 users.

Three steps to root LG Optimus 2X Andoird 4.0 ICS (V30A & V30B):

  1. Install LG Drivers and APX and your PC
  2. Unlock Bootloader and flash recovery
  3. Flash the root file and enjoy

LG Optimus 2X Driver:

LG Optimus 2X nvflash_recovery & APX Driver:

Superuser-3.2.zip Download:

How to install APX driver:

  1. Download and extract nvflash_recovery to C:
  2. Pull out battery
  3. Holding “Volume up” & “Volume down” while connect your phone
  4. You can see the image below in your PC device manager
  5. Right click to update driver
  6. Choose the driver Path: C:\nvflash_recovery\driver
  7. Click next to install the driver
  8. Enjoy

image

 

 

How to Unlock Bootloader:

How to flash Recovery:

  1. Pull out battery
  2. Holding “Volume up” & “Volume down” while connect your phone
  3. Run C:\nvflash_recovery\recovery.bat
  4. Choose 1
  5. Done

How to Flash the root file:

  1. Pull the battery in your LG Optimus 2X
  2. Enter into Recovery by holding “Volume down” + “Power button”
  3. Download and put Superuser-3.2.zip in the root of your SD card
  4. Flash and enjoy

If you have completed the steps above, your LG Optimus 2X must be rooted now. Feel free to let know if you have any question. Enjoy

LG Cell Phone – Related Posts

8 thoughts on “How to Root LG Optimus 2X with Andoird 4.0 ICS (V30A & V30B)”

  1. Hi, I don’t know how to flash the root file. Could you please explain more specific? After we flash the recovery, do we insert the battery and hold “Volume down” + “Power button” right away? I didn’t see anything then.
    When I open the phone and connect to the computer in the usual way, I cannot see the Root folder either…
    I look forward to you reply!
    Thanks for your help! 🙂

  2. Hi,
    Thanks for this tutorial. I think everything went fine untill step 3. I have the same question as pol 2304; how do i ‘flash’ the root with superuser 3.2 after moving the unzipped (?) superuser 3.2.zip file to the root of the SD card ?
    Thanks for your answer and this tutorial!
    Best regards from Holland/amsterdam

  3. Hi,
    In adition to what i wrote earlier: I missread step 3. Everything is working as described above, rooting succeeded! Thanks again

  4. Olá amigo então acho que fiz errado tipo instalei o APX e depois cliquei em flash ai quando abri meu celular meu wiff não funcionava mais e agora me ajuda

  5. Hi.

    I waited 5-10 minuts, then I chose “discard APX” in windows and disconnected when “s/w download” still was running. After inserting my battery and booting my phone, it was rooted.

Leave a Reply

Your email address will not be published.