How to Flash LG G Pro 2 with a TOT Firmware

Here is the official tot and dll to flash / unbrick your LG G Pro 2 using LG FlashTool. Just use LG G Flex’s guide http://www.lg-phones.org/how-to-flash-unbrick-lg-g-flex-back-to-stock.html.

Notes- In the zip file I gave you the LGFlashTool and tot and dll.

Notes- make sure you use the correct dll. if you don’t use the correct dll the flash will not start and will give you download fail in LG FlashTool.

Notes- After you get to the home screen for the first time. Please do a factory reset. Go to System Settings then go to backup and reset and follow the prompts and your phone will be ready.

Before you do the process, you need these software below:

How to Flash LG G Pro 2 with a tot firmware:

1. Install Flashtool V1.5. Default install folder C:\LG\LGFlashtool

2. Copy crack file Megalock.dll to C:\LG\LgFlashtool

3. Enter download mode: Turnoff, push vol+ and plug USB cable in

4. Open Device Manager on your computer and choose COM41 for phone connection:

12

5. Open Flashtool, choose .dll and .tot file, then fresh yellow icon like this:

345

6. When Flashtool show Realdy, push USB out for 5secs and plug in again. Flash tool will automatic run

678

 

7. Done and enjoy

LG Cell Phone – Related Posts

6 thoughts on “How to Flash LG G Pro 2 with a TOT Firmware”

  1. I followed everything you said, but stucked at the final phase.
    The message: DOWNLOAD FAIL (in red).
    It shoud be sucessful.
    Help me plz.

  2. “I followed everything you said, but stucked at the final phase.
    The message: DOWNLOAD FAIL (in red).
    It shoud be sucessful.”
    After phone reboot, you can see a window “Autotouch test”. Press OK, and press phone’s Power button + “Normal boot” in menu.

  3. its good lG FLASH Tool 100% working butt the tot file is not for lg g pro 2 F350L. the avalible tot file is F350 LG G 2

Leave a Reply

Your email address will not be published.