Is there some way to connect the LG Voyager to the mac? Okey, you may try the BitPim. Bitpim is a tricky bastard with mac sometimes. Hopefully, this answers some questions.  LG-Voyager info

First you have to edit your serial port connection. Go to your bluetooth preferences and do this… LG Phone Problem and solution

This is not always an option. If you run into a problem, unpair your LG Voyager from the computer, unpair the computer from your LG Voyager, and then take the battery out of your LG Voyager for roughly 3 minutes.  Turn it back on, repair them, and try again. If you still didn’t get it, keep doing that over and over until it works, theres no real science behind it.

Next, select BT DIAG.

Now make sure your protocol is RS-232, it should default to this, but still check it. For a side note, you select “modem” when you’re connecting it after the “dun” hack.

After you’ve done this, Copy the path…

Very nice, now open bitpim… it wont recognize your LG Voyager at first, but screw that it doesn’t matter. Go to your preferences “File” –> “preferences “.
Paste the path that you copied under the comport, and obviously, select the LG Voyager as the phone type, and click ok.

Now you’re pretty much done. You can go to “get phone data” to sync your phone with various things on your computer, or you can go to the “file system” tab and click the arrow under the ” /” folder to load the file system.

I hope that helped a little.

p.s. you can’t connect it with the usb cable, there are no drivers out yet for that, sorry.

via voyager-lg.com posted by d0n601

LG cell Phone – Related Posts

• LG Voyager tips – save txt messages by bitpim
• New LG Voyager Specific Drawing Pad
• LG Voyager – Play Games while on hold
• LG Voyager tips – Slideshow WallPaper