Aug
28
Filed Under (LG Incite, LG Phone Problem and Solution) by lg-phones on 28-08-2011

Following is the method to tell you how to enter into LG Incite Emergency Download Mode, this mode will help you to connect your LG Incite to your computer and use flashing tools (e.g. LGDMP) to restore or change your firmware. I am pretty sure it can get your phone working again if it is bricked. Good luck. LG Phone Problem and Solution

How to enter into LG Incite Emergency Download Mode Steps:

  1. Turn off the LG Incite
  2. Remove the battery from the phone
  3. Hold down volume down button + lock button
  4. Connect your phone to PC using the USB cable
  5. Check the front LED is green and the screen displays “Emergency download.”

Caution: Remember to backup your files before flashing. This will erase all of your personal data. LG-Incite info

LG Incite Phone Photos - LG Cell Phone Pictures

lg-incite

Read the rest of this entry »

Dec
27
Filed Under (LG Incite, LG Phone Problem and Solution) by lg-phones on 27-12-2010

First of all, you need to download the ROM that you want to your PC or laptop.  LG Phone Problem and Solution

Notice: The following tutorial must be do on an XP computer, not Vista or your incite will be bricked. If that happened, I’m not responsible for the damage, you do so at your own risk. LG-Incite info

How to Update LG Incite device Steps:

  1. Download the LG Incite Upgrade (http://www.lgmobilephones.com/incite.aspx) to your PC, and click the phone icon.
  2. Backup all user data before phone s/w update. (contacts, schedule, picture, etc.)
  3. Power off your LG Incite.
  4. Connect USB cable to PC
  5. Press volume down key(left side) and Lock key(right side) at the same time connect USB cable to phone
  6. Check Emergency Download message in your phone and check green LED(Top Right Side)
  7. Click ‘Start update’ button

LG Incite Phone Photos – LG Cell Phone Pictures

lg-incite-att-trio

Read the rest of this entry »

Jul
02
Filed Under (LG Cell Phone Software, LG Incite) by lg-phones on 02-07-2010

The iGO is a new GPS software for the LG Incite. Caution: Turn off aGPS before starting the iGO GPS on your LG Incite or you may incur date charges. LG Cell Phone Software

Step 1: Download iGO (Incite Version) and GPSGate from here: LG-Incite info

Step 2: Extract that RAR file onto your desktop. It will probably be a folder titled iGO8_Incite.

Step 3: Establish an ActiveSync connection to your phone, then copy the files INSIDE the iGO8_Incite folder (iGO8 folder and GPSGatePPC.ARM.cab) to your SD card on your Incite.

Step 4: Check this website for the map file you wish to use:

Download it, then extract it to your desktop.

Step 5: With your still connected Incite, open the iGO8 folder in the root of your SD card that you just copied over. You will need to copy 4 files from your map to various folders within the "content" folder of the iGO8 folder. From your map folder, copy the files into these areas:

StorageCard\iGO8\content\building\
Building files ending in .3dc (3D building) and .3dl (3d Landmark) go in this folder.

StorageCard\iGO8\content\map\
The Map file with the .fbl extension goes in here.

StorageCard\iGO8\content\poi\
Point of interest files go in here, ending with .poi.

DO NOT TOUCH THE OTHER FOLDERS. I WILL MURDER YOU IN YOUR SLEEP IF YOU TOUCH THE OTHER FOLDERS.

Step 6: You may now unplug your phone. In your install, I have included several language files and voice files for you to choose from, so should you get any errors for those, explain the error below and we’ll try to help out.

Step 7: Open your File Explorer and run the GPSGate cab file that you copied over earlier, installing GPSGate to your incite. Run GPSGate after this, pressing the ">" button to let it search and find your connection. If I recall, it opened up port 2 on my Incite (remember this for iGO). Baud didn’t matter, it opened them all.

Step 8: Once GPSGate successfully finishes, use File Explorer to navigate to the iGO8 folder in your SD card, then run iGO8.exe. Turn Advanced mode on, then go into "Settings", then "GPS". Select your port as port 2, with any Baud you like. It should say something to the effect of "GPS Connected Successfully" on the top of the screen.

Step 9: Go back to the home screen and enjoy your new GPS!

Step 10: (Optional) Create a shortcut of the iGO.exe program to the Windows\Start Menu\Programs folder. Use file explorer on your phone to create the shortcut. (Thanks Homerwasa)

PS: If you have issues with your satellite losing signal, make sure your iGO GPS is set to "Backlight Always On" and turn your accelerometer off while using and it shouldn’t be an issue.

iGO GPS Screenshots (Don’t worry, ours is in English) LG Cell Phone Pictures

flxzeq 2a0b5f5 21kl8hw 34i2q9j

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Read the rest of this entry »